MAX4535CPD
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 4pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 275ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -53dB @ 1MHz |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
MAX4535CPD Overview
As the electronic part is packed in 14-DIP (0.300, 7.62mm), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around 0°C~70°C TA. In total, there are 14 terminations. As a result of its 2 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. A total of 14 pins are injected into the electrical part body. These analog multiplexers are built based on DPST - NO switching circuits. The multiplexer consists of 2 circuits. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.
MAX4535CPD Features
2 Channels
Switch Circuit: DPST - NO
MAX4535CPD Applications
There are a lot of Rochester Electronics, LLC MAX4535CPD Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Microwave transmission systems
- Digital cross connects (DSX-1)
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cell phones
- Cable Modem
- Residential Gateways, Home Gateway/Router
- DVD-R
- PBXs
- Channelized and Unchannelized DS3 applications