MAX44246AUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-uMAX |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MAX44246 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 830μA |
| Nominal Supply Current | 420μA |
| Output Current | 30mA |
| Current - Supply | 830μA |
| Slew Rate | 3.8V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 146 dB |
| Current - Input Bias | 300pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1μV |
| Bandwidth | 5MHz |
| Gain Bandwidth Product | 5MHz |
| Voltage Gain | 168dB |
| Voltage - Input Offset | 1μV |
| Current - Output / Channel | 40mA |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX44246AUA+T Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 1μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 830μA , this buffer op amp will be able to operate. 168dB should be the voltage gain. The buffer amp consists of 2 circuits in total. On the buffer amps, there are 2 channels that can be used. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should only use instrumentation amplifier at temperatures that are no higher than 125°C. As a recommendation, this electronic component should be used with a power supply that can deliver 830μA. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 36V. The linear amplifier's supply voltage should be higher than 2.7V.
MAX44246AUA+T Features
168dB voltage gain
Output Type: Rail-to-Rail
MAX44246AUA+T Applications
There are a lot of Maxim Integrated MAX44246AUA+T Instrumentational OP Amps applications.
- Car stereo
- Hand-held batteries
- Gaming industry
- Image computer boards
- Inverse/same-phase proportional circuit
- pH (acidity)
- PDA
- Multiplication circuits
- E-book readers
- Communication