MAX4354ESD
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 640mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4354 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Circuits | 4 |
| Operating Supply Current | 620μA |
| Slew Rate | 240V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 800nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.25V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 4MHz |
| Gain Bandwidth Product | 400MHz |
| Unity Gain BW-Nom | 30000 kHz |
| Voltage Gain | 0.1dB |
| Average Bias Current-Max (IIB) | 3μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=5 |
| Supply Voltage Limit-Max | 6V |
| Settling Time | 60 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Programmable Power | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
MAX4354ESD Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Voltage Feedback-type. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 14 terminations this year. There are a total of 14 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 14 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 400μV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 620μA supply current, this operational amplifier ics can be operated. 0.1dB should remain the voltage gain. The buffer amp consists of 4 circuits in total. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
MAX4354ESD Features
14 Pins
supply voltage of 5V
0.1dB voltage gain
Output Type: Rail-to-Rail
MAX4354ESD Applications
There are a lot of Maxim Integrated MAX4354ESD Instrumentational OP Amps applications.
- Multimedia playback equipment
- High gain DC amplifier
- Video computer boards
- E-book readers
- Television
- PDA
- Comparator
- Multiplication circuits
- Gaming industry
- Active probe