MAX4337EKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Packaging | Strip |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 50mA |
| Slew Rate | 1.8 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 60 dB |
| Output Current per Channel | 110mA |
| Input Offset Voltage (Vos) | 600μV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 95dB |
| Average Bias Current-Max (IIB) | 0.6μA |
| Input Bias Current | 100nA |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4337EKA+T Overview
Op amp is packaged in SOT-23-8 case. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Linear amplifier is delivered in a Strip case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 2.7V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 600μV. This op amp can operate from a supply current at 1.3mA. Op amp is a member of the 95dB's 95dB family. As far as the device is concerned, buffer amplifier has 2 channels. For this linear amplifier to work, the temperature should not be below -40°C. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. With regard to the supply voltage, this electrical component is capable of working from under 5.5V. A voltage of 2.7V or higher is recommended for the linear amplifier's supply voltage.
MAX4337EKA+T Features
8 Pins
supply voltage of 2.7V
95dB voltage gain
MAX4337EKA+T Applications
There are a lot of Maxim Integrated MAX4337EKA+T Instrumentational OP Amps applications.
- Vehicle electronics
- Addition operation circuits
- E-book readers
- High/low-pass filter circuit
- Home audio systems
- Video computer boards
- Proportional counter tubes
- Scintillation detectors
- Active probe
- Large motor controllers