MAX4123EUA
| Parameters | |
|---|---|
| Supply Voltage | 6.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4123 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.25V |
| Power Supplies | 2.7/6.5V |
| Number of Circuits | 1 |
| Operating Supply Current | 725μA |
| Nominal Supply Current | 650μA |
| Output Current | 50mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6.5V ±1.35V~3.25V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 106dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7.5V |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
MAX4123EUA Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 6.5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 350μV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 725μA . Maintain 106dB as the voltage gain. There are 1 circuits on this op amp. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3.25V voltage.
MAX4123EUA Features
8 Pins
supply voltage of 6.5V
106dB voltage gain
Output Type: Rail-to-Rail
MAX4123EUA Applications
There are a lot of Maxim Integrated MAX4123EUA Instrumentational OP Amps applications.
- Medical instruments
- Oscilloscopes
- Division circuits
- Car stereo
- Television
- Information processing
- Industrial control system
- Power transmission
- Professional videography
- Automotive sensors