MAX4018ESD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 3 |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX4018 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Channels | 3 |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 120mA |
| Slew Rate | 600V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 5.4μA |
| Voltage - Supply, Single/Dual (±) | 3.15V~11V ±1.575V~5.5V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 150MHz |
| Gain Bandwidth Product | 150MHz |
| Voltage Gain | 61dB |
| Power Supply Rejection Ratio (PSRR) | 57dB |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4018ESD Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. In this case, there are 14 pins on the board. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 4mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 5.5mA, this op amp ic can operate. Voltage gain should remain at 61dB. Instrumentation amplifier has 3 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer.
MAX4018ESD Features
14 Pins
61dB voltage gain
Output Type: Rail-to-Rail
MAX4018ESD Applications
There are a lot of Maxim Integrated MAX4018ESD Instrumentational OP Amps applications.
- Switching amplifier
- Medical instruments
- Micro signal measurement
- Signal operation
- Radar
- Logarithmic operation circuits
- Addition operation circuits
- High-frequency data acquisition systems
- Biopotential
- Semiconductor detectors