MAX3490CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX3490 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 1.9mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 90 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 35 ns |
| Output Low Current-Max | 0.0025A |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.000002A |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX3490CPA+ Overview
The enhanced 8-DIP (0.300, 7.62mm) package makes it an excellent LED driver.The Tube package contains this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.On any Through Hole-type PCB or development board, this wide receiver can be placed.This differential driver requires a 3V~3.6V power supply.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.An operating voltage range of 3.3V is suitable for this line driver ic.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.In this package, you will find 8 market-standard pinouts for this transceiver.MAX3490 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.Wide receiver with enhanced power dissipation control, 8-pin.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.There is a capability of 1-bit resolution with this ic receiver.There is typically a resolution of 1 bits specified with this receiver.This transceiver module is designed to operate from an input voltage supply of 3.3V.Line Driver or Receivers is a subcategory of this rf transceiver module.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.
MAX3490CPA+ Features
Tube package
8 pin count
8 pins
MAX3490CPA+ Applications
There are a lot of Maxim Integrated MAX3490CPA+ Drivers/Receivers/Transceivers applications.
- Precision geodetic measurement
- TV signal transmission
- Telecom applications
- Radio transmission
- Remote controls
- Gigabit Ethernet
- Wireless teaching
- Servers
- Sensor reporting
- 1x/2x Fiber Channel