MAX3483EESA+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX3483 |
| Pin Count | 8 |
| Output Voltage | 3V |
| Operating Supply Voltage | 3.3V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 1.1mA |
| Output Current | 20μA |
| Propagation Delay | 75 ns |
| Data Rate | 250kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Output Low Current-Max | 0.0025A |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
MAX3483EESA+ Overview
Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.Tube package is used for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver requires a 3V~3.6V power supply.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.Driver ICs with a supply voltage range of 3.3V can operate efficiently.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.With the part number MAX3483 identifying the product type, temperature, package, etc., you can search with it to see more variants.8-pin driver IC with improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There is usually a 1-bit resolution specified for this receiver when it is used.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.A voltage of 3V can be delivered by Wide receiver.In this bluetooth transceiver, a 20μA output current is provided as an output.
MAX3483EESA+ Features
Tube package
8 pin count
8 pins
MAX3483EESA+ Applications
There are a lot of Maxim Integrated MAX3483EESA+ Drivers/Receivers/Transceivers applications.
- Mainframes, workstations or storage devices
- interconnection between computers
- Bar, KTV wireless entertainment
- Sensor reporting
- Shortwave receiver
- Wireless access points
- Satellite ground stations
- Datacom networking applications
- Televisions
- Fiber distributed data interface (FDDI)