MAX3483CPA+
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX3483 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Supply Current-Max | 2.2mA |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Receive Delay-Max | 120 ns |
| Transmit Delay-Max | 1400 ns |
| Output Low Current-Max | 0.0025A |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.000002A |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
MAX3483CPA+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-DIP (0.300, 7.62mm) package.In the Tube package, this receiver is mounted.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.PCBs or development boards with Through Hole-types can accommodate this wide receiver.Power supply for this differential driver is 3V~3.6V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.With a supply voltage range of 3.3V, this line driver ic operates efficiently.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number MAX3483 describes the product type, temperature, package, etc., you might get more options by searching with it.It is a 8-pin driver IC with enhanced power dissipation controls.This ic receiver provided a 1-bit resolution capability. In most cases, the receiver will be specified with a 1-bit resolution.Line Driver or Receivers is a subcategory of this rf transceiver module.Driver ICs such as this one are designed to operate from 3.3V power sources.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 2.2mA of input current.
MAX3483CPA+ Features
Tube package
8 pin count
8 pins
3.3V power supply
MAX3483CPA+ Applications
There are a lot of Maxim Integrated MAX3483CPA+ Drivers/Receivers/Transceivers applications.
- Vehicle
- Fast Ethernet
- Aircraft positioning
- Interconnection between switches and computers
- Precision geodetic measurement
- High-speed computer links
- Cordless telephone
- 1x/2x Fiber Channel
- Telecom applications
- transmission relay