MAX337EWI+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX337 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 4.5V~20V ±4.5V~20V |
| Supply Current-Max (Isup) | 1.11mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 20pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 3.5pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Signal Current-Max | 0.03A |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MAX337EWI+ Overview
Due to its 28-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. 8:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. In total, 28 terminations have occurred. The electronic part provides high-quality output because it has 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Into the electrical component body are injected 28 pins. There are 2 circuits in this switch device. Use MAX337 to search for variants of the digital switches. In this analog multiplexer, the value is Multiplexer or Switches. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board.
MAX337EWI+ Features
8 Channels
MAX337EWI+ Applications
There are a lot of Maxim Integrated MAX337EWI+ Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Battery Powered Instruments
- Audio and video signal routing
- New designs requiring multiplexer functions
- E1 Network Equipment
- Medical systems
- Automatic test equipment
- ISDN NT1/TA
- High reliability control systems
- HDTV