MAX336CAI+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX336 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1μA |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~20V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 400Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 20pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 3.5pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height | 1.78mm |
| Length | 10.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX336CAI+ Overview
Shipping overseas is convenient due to the electrical component's packing in 28-SSOP (0.209, 5.30mm Width). Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Increasing operating temperature to around 0°C~70°C TA. 28 terminations have been made so far. By its 16 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. A total of 28 pins are injected into the electrical part body. 1 circuits are used in this analogue multiplexer. Using the MAX336 search parameter, you can discover variants of the switch. It has an internal resistance of 400Ohm. Datasheets for 28 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 30V. Digital switch that provides Dual, Single power at a cost-effective price. 4.5V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 1μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. When using dual power supplies, you should attach at least 4.5V. A voltage of 28V can be used to operate the electronic component.
MAX336CAI+ Features
16 Channels
1μA Supply Current
MAX336CAI+ Applications
There are a lot of Maxim Integrated MAX336CAI+ Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Avionics test equipment
- Ultrasound
- Relay replacements
- 65 V DACs
- Power routing
- Precision instrumentation
- Communication systems
- CSU
- Audio/video switches