MAX333AEWP+
| Parameters | |
|---|---|
| Number of Pins | 20 |
| Weight | 800.987426mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 35Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX333 |
| Pin Count | 20 |
| Number of Channels | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 1μA |
| Max Supply Current | 250μA |
| Turn On Delay Time | 175 ns |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 45Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -78dB @ 1MHz |
| Height | 2.35mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
MAX333AEWP+ Overview
Due to its 20-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operational temperature extended around -40°C~85°C TA. In total, there have been 20 terminations. The electronic part delivers high-quality output through its 4 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 20 pins. These analog multiplexers are built based on SPDT switching circuits. Try searching with MAX333 to find analog multiplexer variants. Analog switches have 35Ohm internal resistance. Please refer to the datasheets for 20 pins functions. Users shouldn't supply more than 30V voltage to the switch device. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 10V. 1μA current would be enough for this multiplexer to operate. Putting voltage greater than 250μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached.
MAX333AEWP+ Features
4 Channels
Switch Circuit: SPDT
1μA Supply Current
MAX333AEWP+ Applications
There are a lot of Maxim Integrated MAX333AEWP+ Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Ultrasound
- SDH
- Automotive applications
- Communication systems
- Avionics and Military Systems
- Private Branch Exchange (PBX)
- Digital Cross-Connects
- Cross Connects