MAX333AEUP+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 35Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 559mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX333 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| Number of Channels | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 1μA |
| Max Supply Current | 250μA |
| Turn On Delay Time | 175 ns |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 45Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -78dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX333AEUP+ Overview
Due to its 20-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. A total of 20 terminations have been recorded. A electrical component with 4 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. As part of its design, the 20 series is equipped with this electronic component. Based on SPDT switching circuits, these analog multiplexers work. Using the MAX333 search parameter, you can discover variants of the switch. This digital multiplexer has 35Ohm internal resistance. Datasheets for functions of 20 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 30V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 10V should be applied to the electronic component. In order to operate this switch device, it would need a current of 1μA. Put voltage above 250μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. A dual power supply should have at least 4.5V voltage attached. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.
MAX333AEUP+ Features
4 Channels
Switch Circuit: SPDT
1μA Supply Current
MAX333AEUP+ Applications
There are a lot of Maxim Integrated MAX333AEUP+ Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Audio signal routing
- Cable Modem
- Data switching
- Industrial
- Audio and video switching
- PCMCIA cards
- Mechanical reed relay replacement
- Battery-powered systems
- FTTH