MAX325EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX325 |
| Output | SEPARATE OUTPUT |
| Power Supplies | 3.3/5V |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 240 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 150 ns |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.7V~16V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX325EUA+T Overview
Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~85°C TA. The total number of terminations is 8. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Circuits number 2 make up this analogue multiplexer. Try searching for MAX325 variants of the analog switch ic. As far as internal resistance is concerned, it has 60Ohm. For functions related to 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 16V to a switch device. Digital switch that provides Single power at a cost-effective price. 2.7V is the lowest voltage the electrical component should receive. This multiplexer would work with 1μA current. Using a single voltage supply, this switch device consumes 2.7V~16V volts. The analogue multiplexer may be damaged if voltage is greater than 1μA. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX325EUA+T Features
Switch Circuit: SPST - NO/NC
1μA Supply Current
MAX325EUA+T Applications
There are a lot of Maxim Integrated MAX325EUA+T Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- E1 Network Equipment
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- DVD-R
- PBXs
- High speed data transmission line cards
- Industrial control systems
- Frame Relay Equipment
- Sample hold systems