MAX325CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX325 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 16V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Voltage - Supply, Single (V+) | 2.7V~16V |
| Drain to Source Resistance | 60Ohm |
| Length | 9.375mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX325CPA+ Overview
Presented in 8-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around 0°C~70°C TA. The total number of terminations is 8. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. 8 pins are injected to the electronic part body. A SPST - NO/NC switching circuit is used to build these analog multiplexers. There are 2 circuits in this switch device. Using the MAX325 search parameter, you can discover variants of the switch. To find out what the 8 pins do, please refer to the datasheets. Using a single voltage supply, this switch device consumes 2.7V~16V volts. Drain to Source resistance is 60Ohm.
MAX325CPA+ Features
1 Channels
Switch Circuit: SPST - NO/NC
Drain-to-Source resistance: 60Ohm
MAX325CPA+ Applications
There are a lot of Maxim Integrated MAX325CPA+ Analog Switches & Multiplexers ICs applications.
- PDAs
- FTTH
- HDTV
- Transmit
- Access Concentrators
- SDH
- Fiber In The Loop (FITL)
- SONET/SDH ADM
- Imaging
- Remote wireless modules