MAX323CSA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX323 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.7V~16V |
| Drain to Source Resistance | 33mOhm |
| Normal Position | NO |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX323CSA Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around 0°C~70°C TA. There are 8 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of its design, the 8 series is equipped with this electronic component. Multiplexers built on a SPST - NO switching circuit are built. Circuits number 2 make up this analogue multiplexer. Using the MAX323 search parameter, you can discover variants of the switch. There is a standard Multiplexer or Switches analogue multiplexer here. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~16V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. This electronic component presents a Drain to Source resistance of 33mOhm.
MAX323CSA Features
1 Channels
Switch Circuit: SPST - NO
Drain-to-Source resistance: 33mOhm
MAX323CSA Applications
There are a lot of Maxim Integrated MAX323CSA Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Frame Relay Equipment
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- PBX interfaces
- Sample hold systems
- Mechanical reed relay replacement
- Video signal routing
- MP3 players
- Cable PC
- Medical systems