MAX3232CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 1mA |
| Data Rate | 235Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Interface Standard | EIA-232; TIA-232 |
| Out Swing-Min | 10 V |
| High Level Input Current-Max | 0.000001A |
| Height Seated (Max) | 4.572mm |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3232CPE+ Overview
Due to the enhanced 16-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The receiver is packaged in a Tube package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.PCBs or development boards with Through Hole-types can accommodate this wide receiver.This differential driver consumes 3V~5.5V for its power supplyDuring operation, this electronic part may have up to 2/2 eligible receivers/drivers.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.Wide receiver can operate within the range of 3.3V supply voltages efficiently.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.ICs that are packaged with market standard pinouts are available on the market.Since the part number MAX3232 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.16-pin driver chip with enhanced power dissipation.In this ic receiver, the resolution was able to be set to a maximum of 2 bits.This receiver is typically specified with a resolution of 2 bits. A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.The driver IC in this product is designed so that it can be powered by 3.3/5V.ICs with EXTERNAL CHARGE PUMP functions also improve the overall stability and accuracy of signal management.There should be enough current supplied to the VCC pin of the part, but not more than 1mA.
MAX3232CPE+ Features
Tube package
16 pin count
16 pins
3.3/5V power supply
MAX3232CPE+ Applications
There are a lot of Maxim Integrated MAX3232CPE+ Drivers/Receivers/Transceivers applications.
- IP cameras
- 1x/2x Fiber Channel
- Ship
- Automation systems
- Indoor ad hoc meeting
- Datacom networking applications
- Portable radio
- Remote controls
- Wired telephone
- Point-to-point networking