MAX3221EIDB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3221 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-F; TIA-232-F; V.28 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3221EIDB Overview
This LED driver IC features an enhanced 16-SSOP (0.209, 5.30mm Width) package for driving common LEDs.The package of this receiver is Tube.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.A power supply of 3V~5.5V is used by this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.This line driver ic can operate efficiently with a supply voltage range of 3.3V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.With the part number MAX3221 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 16-pin driver IC with enhanced power dissipation controls.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.It provided a 1-bit resolution capability with this ic receiver.It is typical for this receiver to have a resolution of 1 bits when it is specified.There is a 5V input voltage supply that can be used to operate this transceiver module.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.There are 1 transceivers implemented in this module isolated transceiver.In addition, the optical transceiver module incorporates a ALSO OPERATES AT 5V SUPPLY function that improves the overall stability and accuracy of the signal management.
MAX3221EIDB Features
Tube package
16 pin count
16 pins
MAX3221EIDB Applications
There are a lot of Texas Instruments MAX3221EIDB Drivers/Receivers/Transceivers applications.
- Remote controls
- Wireless security systems
- Optical sub-assembly (OSA)
- Wired telephone
- Wireless access points
- Radio transmission
- Cable network front end
- Carrier phase observations
- Wireless communication
- Data center