MAX213EAI+
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Driver Number of Bits | 4 |
| Receiver Number of Bits | 5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Receive Delay-Max | 40000 ns |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 1.99mm |
| Length | 10.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX213 |
| Pin Count | 28 |
MAX213EAI+ Overview
Driver ICs with enhanced 28-SSOP (0.209, 5.30mm Width) packages are excellent for driving LEDs with common characteristics.Tube package is used to mount this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.Up to 4/5 receivers/drivers can be installed simultaneously on this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.This line driver ic can operate efficiently with a supply voltage range of 5V.This integrated circuit has 28 terminations designed for driving and receiving signals from data.There are 28 pinouts available on this transceiver which are market standard.Since the base part number MAX213 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation driver IC with 28 pins.It provided a 4-bit resolution capability with this ic receiver.Typically, the resolution of this receiver is specified to be 5 bits.Line Driver or Receivers is a subcategory of this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.
MAX213EAI+ Features
Tube package
28 pin count
28 pins
5V power supply
MAX213EAI+ Applications
There are a lot of Maxim Integrated MAX213EAI+ Drivers/Receivers/Transceivers applications.
- Changeing the frequency from IF to RF
- Notebook
- Optical sub-assembly (OSA)
- interconnection between switches
- Satellite communications networks
- Sensor reporting
- Satellite radio receiver
- Structural bonding
- Portable radio
- Shortwave receiver