MAX207CDW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | MAX207 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of I/O | 16 |
| Nominal Supply Current | 20mA |
| Propagation Delay | 2 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 5/3 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 5 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 3 |
| High Level Input Current-Max | 0.0002A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX207CDW Overview
This driver chip is excellent for driving common LEDs due to its enhanced 24-SOIC (0.295, 7.50mm Width) package.Tube package is used to mount this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.You can place this wide receiver to any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 4.75V~5.25V.During operation, this electronic part may have up to 5/3 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.Integrated into this wide receiver are 24 terminations that are used for driving and receiving signals from data.Transceiver comes with 24 standard pinouts that meet the market's requirements.This part number MAX207 can be used to search for more variants based on the product type, temperature, package, etc.A 24-pin driver IC with enhanced power dissipation control is featured here.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.An input voltage supply of 5V is required to operate the transceiver module.Line Driver or Receivers is a subcategory of this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.ICs implement a total of 1 transceivers.This rf transceiver module can have?up to 3 eligible receivers on the field at once.?On the integrator circuit, there are 5 drivers embedded.There are 16 standard serial I/O ports on this IC, which makes it a very versatile one.
MAX207CDW Features
Tube package
24 pin count
24 pins
5V power supply
MAX207CDW Applications
There are a lot of Texas Instruments MAX207CDW Drivers/Receivers/Transceivers applications.
- Precision geodetic measurement
- Thermal management
- Car alarm systems
- Indoor ad hoc meeting
- Vehicle
- Aircraft positioning
- Aircraft navigation
- Satellite communication
- Wireless access points
- Copper connection network