MAX202EESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202EESE+T Overview
Driver ICs with enhanced 16-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Tape & Reel (TR) package contains this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.A differential driver like this uses 4.5V~5.5V of power.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.An output voltage range of 5V is sufficient to run this line driver ic efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.The base part number MAX202 identifies the product type, temperature, package, etc., so you can search for more variants by using it.The driver IC has improved power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.As a general rule, this receiver has a resolution of 2 bits that is usually specified.This transceiver module is designed to operate from an input voltage supply of 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.The driver IC in this product is designed so that it can be powered by 5V.There are 1 transceivers implemented in this module isolated transceiver.This electronic part can have?up to 2 eligible drivers on the field at once.?ICs with EXTERNAL CHARGE PUMP functions also improve the overall stability and accuracy of signal management.This IC has 8 serial I/Os that are standard for this type of IC.
MAX202EESE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX202EESE+T Applications
There are a lot of Maxim Integrated MAX202EESE+T Drivers/Receivers/Transceivers applications.
- Data center
- Car radio
- Point-to-point networking
- Wireless security systems
- Notebook
- Tuner
- Transmission stations
- Desktop radio
- WDM transmission
- Fiber optic cable connection network