MAX202CDWR
| Parameters | |
|---|---|
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 15mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 2.65mm |
| Length | 10.3mm |
MAX202CDWR Overview
This LED driver IC features an enhanced 16-SOIC (0.295, 7.50mm Width) package for driving common LEDs.Tape & Reel (TR) package is used to mount this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyThe field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 5V.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.This transceiver is packaged with 16 market standard pinoutsMAX202 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.This is a 16-pin driver IC with enhanced power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The integrator circuit is embedded with 2 drivers.
MAX202CDWR Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX202CDWR Applications
There are a lot of Texas Instruments MAX202CDWR Drivers/Receivers/Transceivers applications.
- Indoor ad hoc meeting
- WDM transmission
- 1x/2x Fiber Channel
- Long-distance fiber optic network applications
- Ship
- Wireless multimedia center in smart home
- Fiber distributed data interface (FDDI)
- Satellite radio receiver
- Car alarm systems
- Tuner