MAX17602ASA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 588.2mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | MAX17602 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Element Configuration | Dual |
| Nominal Supply Current | 1A |
| Output Current | 4A |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 12 ns |
| Rise Time | 6ns |
| Fall Time (Typ) | 5 ns |
| Turn-Off Delay Time | 12 ns |
| Rise / Fall Time (Typ) | 40ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX17602ASA+ Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.A total of 2 drivers are integrated into its configuration.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~14V.Gate type N-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various related parts under its base part number MAX17602.The mount method is Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver utilizes the interface IC HALF BRIDGE BASED MOSFET DRIVER.As a maximum, there is 4A limit to the output current.On the board, there are 8 component pins.Mosfet driver supports an output current of 4A.Its maximum power dissipation of 588.2mW also demonstrates its maximum ability to transfer power without overheating.
MAX17602ASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 588.2mW
MAX17602ASA+ Applications
There are a lot of Maxim Integrated MAX17602ASA+ gate drivers applications.
- High-speed communications
- serial peripheral interface (SPI), I2C
- Industrial Motor Inverter - Power Tools, Robotics
- Motor Control
- White Goods - Air Conditioner, Washing Machine,
- Welding
- Line drivers
- Uninterruptible Power Supplies (UPS)
- High power buffers
- Solar inverters