MAX17595ATE+

MAX17595ATE+

16 Terminations8V~29V 16 Pin MAX17595 AC to DC power converter100kHz~1MHz


  • Manufacturer: Maxim Integrated
  • Origchip NO: 503-MAX17595ATE+
  • Package: 16-WFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 257
  • Description: 16 Terminations8V~29V 16 Pin MAX17595 AC to DC power converter100kHz~1MHz (Kg)

Details

Tags

Parameters
Factory Lead Time 25 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-WFQFN Exposed Pad
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tube
Published 2013
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
HTS Code 8542.39.00.01
Subcategory Switching Regulator or Controllers
Terminal Position QUAD
Terminal Pitch 0.5mm
Frequency 1MHz
Base Part Number MAX17595
Output Voltage 7.4V
Analog IC - Other Type SWITCHING CONTROLLER
Operating Supply Current 2mA
Output Current 100mA
Voltage - Supply (Vcc/Vdd) 8V~29V
Control Features EN, Frequency Control, Soft Start, Sync
Topology Flyback
Control Mode CURRENT-MODE
Frequency - Switching 100kHz~1MHz
Rise Time 20ns
Fall Time (Typ) 10 ns
Internal Switch(s) No
Fault Protection Current Limiting, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 50 %
Duty Cycle 48%
Output Isolation Isolated
Voltage - Start Up 20V
Height 750μm
Length 3.1mm
Width 3.1mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant

MAX17595ATE+ Overview


In the package 16-WFQFN Exposed Pad , the ac to dc converter is embedded.In Tube case, the ac dc converter is available.The AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TA °C in order for it to perform properly.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.The switching frequency reaches 100kHz~1MHz .The AC/DC converter is capable of being used when the supply voltage is 8V~29V (Vcc/Vdd).There are a total of 16 terminations in it.On this ac/dc converter, there are 16 pins.Surface Mount are the recommended mounting method for the ac dc converters.If you select the MAX17595 family, you will be able to search similar acdc converters.AC to DC converter is included in Switching Regulator or Controllers .Currently, the output current is set to 100mA .This AC/DC converter produces a voltage of 7.4V as its output.As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.You may read the REACH SVHC standard at Unknown .

MAX17595ATE+ Features


Packaged with 16-WFQFN Exposed Pad
Switching Frequency at 100kHz~1MHz
With 16 pins
Output Current at 100mA

MAX17595ATE+ Applications


There are a lot of Maxim Integrated MAX17595ATE+ AC DC Converters applications.

  • Adapters for Handheld Electronics
  • Auxiliary Power Supplies
  • Replacements for bulky plug-in transformers
  • AC/DC Adaptors/Chargers for PDAs
  • Set-top boxes
  • Smartphones
  • Utility meters
  • AC?DC USB chargers for Tablets
  • Home Appliance Applications
  • Air conditioners

Write a review

Note: HTML is not translated!
    Bad           Good