MAX17005ETP+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR, ALSO OPERATES IN ADJUSTABLE MODE FROM 4.2 TO 4.4 V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 19V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX17005 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.2V |
| Input Voltage-Nom | 19V |
| Power Supplies | 19V |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1μA |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 26V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Nominal Input Voltage | 26V |
| Switcher Configuration | BUCK |
| Fault Protection | Over Current, Short Circuit |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 3 ~ 4 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 5A |
| Battery Pack Voltage | 16.8V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MAX17005ETP+ Overview
In the Tube package, you will find it.The package 20-WFQFN Exposed Pad includes a version of it.Device mounting type Surface Mount is specified.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.The device relies on an analog IC called SWITCHING REGULATOR to operate.If the device needs to be charged, it must be supplied with Constant - Programmable current.By using the base part number MAX17005, related parts can be found for this device.It is possible to find a total of 20 terminations.There is a setting of 16.8V for the battery pack.The device has a total of 20 pins.The charging current of the part is 5A at maximum.There are 20 pins required in order for the product to function.It should be able to run off of a 19V battery.To ensure the device works properly, the supply voltage should not exceed 26V.In the case of 4.2V, the output voltage is likely to produce high efficiency.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.At a low supply voltage, such as 8V, it can operate to the best of its ability.A mounting requires that it align itself with Surface Mount.In most cases, the maximum supply voltage (Vsup) is set to 6mA.When it comes to the part's power supply, it is set to 19V.There is 1μA current flowing through the gadget's supply.19V is the input voltage for the device.26V is the maximum input voltage it can handle.In addition to the features above, the device can also generate the following features of ALSO OPERATES AS LDO REGULATOR, ALSO OPERATES IN ADJUSTABLE MODE FROM 4.2 TO 4.4 V.
MAX17005ETP+ Features
Battery pack voltage of 16.8V
Power Management Circuits subcategory
Addtional features of ALSO OPERATES AS LDO REGULATOR, ALSO OPERATES IN ADJUSTABLE MODE FROM 4.2 TO 4.4 V
20-WFQFN Exposed Pad package
MAX17005ETP+ Applications
There are a lot of Maxim Integrated MAX17005ETP+ Battery Chargers ICs applications.
- Fleet management
- Home routers
- Wearables
- Drone
- Battery backup applications
- Boat
- Solar charging
- Industrial lighting
- Wireless headphones
- Personnel carriers