MAX15012CASA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5385W |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MAX15012 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 140μA |
| Output Current | 2A |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 7ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 63 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 63 µs |
| High Side Voltage - Max (Bootstrap) | 175V |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MAX15012CASA+ Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package.Tube represents the packaging method.There are 2 drivers installed for this device.Gate drivers is mounted in the way of Surface Mount.A supply voltage of 8V~12.6V demonstrates its superiority.This gate type has a N-Channel MOSFET design.There is a temperature range for this device of -40°C~150°C TJ.Non-Inverting is used as the input type in this program.Mosfet driver is based on 8 terminations.There are various parts that can be found under its base part number MAX15012.In this case, Surface Mount indicates how the device is mounted.A total of 8 pins are available on the device.In order to operate, a voltage of 12V has to be applied.There is a maximum output current of 2A that can be achieved.Several electronic components are included in its subcategory of MOSFET Drivers.A board with 8 component pins is available.High-side voltage - Max (Bootstrap) can be as low as 175V.Mosfet gate drivers supports a current output of 2A.1.5385W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.To increase stability, keep the supply current at 3mA.
MAX15012CASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 175V
Maximum power dissipation of 1.5385W
MAX15012CASA+ Applications
There are a lot of Maxim Integrated MAX15012CASA+ gate drivers applications.
- Welding
- DC/DC converters
- Digitally controlled power supplies
- High-speed communications
- Isolated Gate Driver Supplies
- High current laser/LED systems
- Refrigerator
- Head-up and Head mounted displays
- Motor controllers
- Isolated Supplies for Motor Control