MAX1492CNI+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.1429W |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1492 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Polarity | Bipolar |
| Configuration | 7 Segment + 2 Annunciators |
| Interface | Serial |
| Operating Supply Current | 960μA |
| Nominal Supply Current | 580μA |
| Number of Bits | 3 |
| Converter Type | ADC, DELTA-SIGMA |
| Resolution | 0.4375 B |
| Sampling Rate | 5 sps |
| Number of Analog In Channels | 1 |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Display Type | LCD |
| Number of Converters | 1 |
| Conversion Rate | 2.5 sps |
| Analog Input Voltage-Max | 2.2V |
| Analog Input Voltage-Min | -2.2V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1492CNI+ Overview
The package follows the same design pattern as Tube.The package contains version 28-DIP (0.300, 7.62mm), which includes it.This electrical device has a LCD display type.This electronic component is mounted on the board using Through Hole.The operating temperature of this electrical part is 0°C~70°C.I believe that it will work with a 2.7V~5.25VV power source.Transmission lines are terminated with 28 terminations using devices whose characteristic impedance matches that of the transmission line.Among the MAX1492 family of devices, this is one.Display drivers is equipped wDisplay driversh 28 pin count.28 pins are used in the design.Display drivers is mounted using the Through Hole axis on the board, so that the component can be easily removed.Display drivers is powered from a supply voltage of 3.3V.To ensure that 960μA plays its full role, the supply current must be provided so that the function of 960μA can be accomplished.Additionally, it can be incorporated into Analog to Digital Converters.A ADC, DELTA-SIGMA converter is based on the input voltage of the source and the output voltage of the destination.Spectrum bandwidth can be defined as 1 analog In channels.A 3 Bit was used to design this electronic component.
MAX1492CNI+ Features
28-DIP (0.300, 7.62mm) package
MAX1492 family
28 pin count
28 pins
ADC, DELTA-SIGMA converters
MAX1492CNI+ Applications
There are a lot of Maxim Integrated MAX1492CNI+ display drivers applications.
- High and Low Temperature Envlronment s where LCD
- Bargraph Dlsplays
- Avionics VFD Modules
- Vacuum Fluorescent Displays
- Smart Display
- Voltmeter
- Mobile smart TV
- Panel meters
- Gaming Machines Security
- Small Appliances