MAX14759ETA+
| Parameters | |
|---|---|
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 4.1mA |
| Throw Configuration | SPST |
| Supply Type | Single |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 1Ohm |
| High Level Output Current | 500mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 250nA |
| On-state Resistance Match-Nom | 0.0024Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 300μs, 1ns |
| Charge Injection | 1370pC |
| Channel-to-Channel Matching (ΔRon) | 2.4m Ω |
| Crosstalk | -83dB @ 100kHz |
| Switch-on Time-Max | 300000ns |
| Voltage - Supply, Single (V+) | 3V~5.5V |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Max Power Dissipation | 1.9512W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX14759 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
MAX14759ETA+ Overview
Shipping overseas is convenient with the electronic component packed in 8-WDFN Exposed Pad. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 8 terminations. The electronic part delivers high-quality output through its 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. A 1 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with MAX14759. An switch multiplexer with 1Ohm internal resistance has a value of 1Ohm. For details about the functions of 8 pins, please refer to the datasheets. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. A low voltage of 3V should be applied to the electronic component. The analogue multiplexer could operate on 4.1mA current. A voltage of 3V~5.5V is required for this switch device, which drains from a single voltage source. It can operate from 5V operating voltages.
MAX14759ETA+ Features
1 Channels
Switch Circuit: SPST - NO
4.1mA Supply Current
-3db Bandwidth: 100MHz
MAX14759ETA+ Applications
There are a lot of Maxim Integrated MAX14759ETA+ Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Remote Powered Equipment
- Medical Instrumentation
- Battery Powered Instruments
- Relay Replacement
- USB 1.1 signal switching circuits
- Digital Cross-Connects
- Avionics and Military Systems
- Isolation
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8