MAX13256ATB+T
| Parameters | |
|---|---|
| Output Current per Channel | 300mA |
| Rise Time | 100ns |
| Fall Time (Typ) | 100 ns |
| Voltage - Load | 8V~36V |
| Current - Output / Channel | 850mA |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Number of Drivers | 1 |
| Rds On (Typ) | 600m Ω LS, 1 Ω HS |
| Turns Ratio - Primary:Secondary | 1:1.5 |
| Load Type | Inductive |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Digi-Reel® |
| Published | 2012 |
| Feature | Internal Oscillator, Status Flag, Watchdog Timer |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Applications | Transformers |
| Power Rating | 10W |
| Max Power Dissipation | 1.9512W |
| Technology | Power MOSFET |
| Voltage - Supply | 8V~36V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX13256 |
| Number of Outputs | 2 |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Logic |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Element Configuration | Single |
| Nominal Supply Current | 6mA |
| Output Configuration | Half Bridge (2) |
| Output Current | 300mA |
MAX13256ATB+T Overview
Digi-Reel? is used to package H bridge.As a cost-saving measure, H bridge is included in the 10-WFDFN Exposed Pad package.Bridge driver is possible to ensure improved reliabilbridge drivery by varying the supply voltage of 8V~36V.There is a mounting of H bridge circuit in Surface Mount.Motor driver H bridge's operating temperature enables -40°C~150°C TJ to function normally.Among H bridge motor drivers many applications are Transformers.Mount the board using Surface Mount.H gates specific characteristics also include Internal Oscillator, Status Flag, Watchdog Timer.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 10 terminations.In signal interfaces, 10 pins serve as pronged contacts.The base H bridge ic number of MAX13256 allows you to find more related H bridge ics by using that number.With a supply voltage of 24V, H bridge circuit operates.H bridge circuit is incorporated with ANALOG CIRCUIT as its analog IC type.Through the pins of the power supply and output, there is a current of 300mA.The Hbridge is equipped with 2 outputs.1 drivers are inegrated in the system.
MAX13256ATB+T Features
Available in 10-WFDFN Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : MAX13256
MAX13256ATB+T Applications
There are a lot of Maxim Integrated MAX13256ATB+T Full Bridge Drivers, Half-Bridge Drivers applications.
- Audio-visual equipment
- Voltage Regulators for DDR memory arrays
- Industrial Automation
- Quad DC motor
- Compact Blade Servers
- Notebook Computers
- Non-V-Core
- Bipolar stepper motor
- VTR
- Home Appliances