MAX13082EASA+
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Base Part Number | MAX13082E |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 1.8mA |
| Data Rate | 250kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 100mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Out Swing-Min | 2 V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Manufacturer Package Identifier | S8+4 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | MATTE TIN |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
MAX13082EASA+ Overview
This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.There is a Tube package for this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 4.5V~5.5V.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver is designed for applications with a temperature of -40°C~125°C.5V is the supply voltage range that this line driver ic can efficiently operate with.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.It is packaged with 8 pinouts that are market standard for this particular transceiver.You can search with MAX13082E to get more variants of this part, since it identifies the product type, temperature, package, etc.It is a 8-pin driver IC with enhanced power dissipation controls.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.Using this ic receiver, you were able to achieve a resolution of 1 bits.There is typically a resolution of 1 bits specified with this receiver.There is a voltage supply of 5V required in order for this transceiver module to be operated.There is a subcategory named Line Driver or Receivers for this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.There are 1 transceivers implemented in this module isolated transceiver.Using the input voltage of 1.8mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.
MAX13082EASA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX13082EASA+ Applications
There are a lot of Maxim Integrated MAX13082EASA+ Drivers/Receivers/Transceivers applications.
- Long-distance fiber optic network applications
- LAN, SAN, WAN (local, storage, work area networks)
- 1x/2x Fiber Channel
- Fiber distributed data interface (FDDI)
- Optical sub-assembly (OSA)
- Switches
- IP cameras
- Metro access rings
- Remote controls
- Wireless modems