M74LCX16374DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 41 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 170MHz |
| Propagation Delay | 7.9 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 170000000Hz |
| Height Seated (Max) | 1.1mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74LCX16374DTR2G Overview
48-TFSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is included in the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. A supply voltage of 2V~3.6V is required for operation. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LCXseries FPGA. In order for it to function properly, its output frequency should not exceed 170MHz. There are 2 elements in it. T flip flop consumes 10μA quiescent energy. A total of 48 terminations have been made. This D latch belongs to the family of 74LCX16374. A voltage of 2.5V is used to power it. This D flip flop belongs to the family of LVC/LCX/Z. It is mounted in the way of Surface Mount. There are 48pins on it. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. An electronic part with 16bits has been designed. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D flip flop is embedded with 2ports. Featuring the maximum design flexibility, it has an output current of 24mA . In order for the chip to function, it has 3output lines. It consumes 20μA of quiescent current without being affected by external factors.
M74LCX16374DTR2G Features
Tape & Reel (TR) package
74LCX series
48 pins
16 Bits
M74LCX16374DTR2G Applications
There are a lot of ON Semiconductor M74LCX16374DTR2G Flip Flops applications.
- Power down protection
- Storage registers
- Buffer registers
- Data Synchronizers
- Shift registers
- High Performance Logic for test systems
- Buffered Clock
- Frequency division
- Count Modes
- Control circuits