M74HC75TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC75 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Circuit | 2:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 10 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 33 ns |
| Trigger Type | HIGH LEVEL |
| Number of Input Lines | 2 |
| Number of Output Lines | 4 |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
M74HC75TTR Overview
A package called 16-TSSOP (0.173, 4.40mm Width) contains it. A Tape & Reel (TR) package is used to package it. It is configured with an output of Differential. This electrical device has the logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. A 2V~6V voltage supply is required for operation. A temperature of -55°C~125°C is set as the operating temperature. The 74HC series of FPGAs is the one this FPGA belongs to. There are 2 bits in this electronic part. This device is designed with 16 terminations. The family in which it belongs to is M74HC75. It operates with a supply voltage of 4.5V. 16 pins are provided. It is a member of the HC/UH family of electronic devices. There are 16 pins on it. Surface Mount is the way in which this electronic part is mounted. The part is in the FF/Latches subcategory. It reaches 6V when the supply voltage (Vsup) reaches maximum. A voltage greater than 2V must be supplied as a power supply (Vsup). An electronic circuit can be found on 2 input lines. On the basis of its reliability, this device is well suited for TAPE AND REEL. There are 4 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
M74HC75TTR Features
16-TSSOP (0.173, 4.40mm Width) package
74HC series
2 Bits
M74HC75 family
16 pin count
16 pins
M74HC75TTR Applications
There are a lot of STMicroelectronics M74HC75TTR Latches applications.
- Digital bus buffer
- Audio and video switching
- PCs and Notebooks
- Lamp and Display (LED)
- Parallel-to-Serial Data Conversion
- Up-Down Johnson
- Parallel Output
- Serial Input
- Timers
- Counting