M74HC564B1R
| Parameters | |
|---|---|
| Max Propagation Delay @ V, Max CL | 32ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | M74HC56 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 90MHz |
| Propagation Delay | 285 ns |
| Turn On Delay Time | 19 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
M74HC564B1R Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. The Tubepackage contains it. There is a Tri-State, Invertedoutput configured with it. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Through Hole. A 2V~6Vsupply voltage is required for it to operate. A temperature of -55°C~125°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74HC series. A frequency of 90MHzshould be the maximum output frequency. There are 1 elements in it. As a result, it consumes 4μA quiescent current and is not affected by external forces. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The M74HC56 family contains this object. It is powered by a voltage of 4.5V . Input capacitance of this device is 5pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. In this case, the electronic component is mounted in the way of Through Hole. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. It reaches 6Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. To achieve this superior flexibility, 8 circuits are used. There are 2/6V power supplies attached to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There are 3 output lines in this JK flip flop.
M74HC564B1R Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
M74HC564B1R Applications
There are a lot of STMicroelectronics M74HC564B1R Flip Flops applications.
- 2 – Bit synchronous counter
- Buffered Clock
- Event Detectors
- Load Control
- Latch-up performance
- Patented noise
- Data storage
- Data Synchronizers
- Count Modes
- ESCC