M74HC563B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | M74HC56 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 33 ns |
| Number of Input Lines | 8 |
| Height Seated (Max) | 3.93mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC563B1R Overview
The 20-DIP (0.300, 7.62mm) package contains it. A package of Tube has been used. Tri-State is used for the output it is configured with. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Through Hole method. It operates with a supply voltage of 2V~6V. During operation, the temperature is set at -55°C~125°C. This FPGA is part of the 74HC series. With this electronic part, there are 8 bits. This device has been designed with 20 terminations available. There is no doubt that it belongs to the family M74HC56. With a supply voltage of 4.5V, it operates. There are 20 pins on it. It is a member of the HC/UH family of electronic devices. The 20 pins are designed into it. Through Hole is used to mount this electronic part. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 6V. The system is powered by 2/6V sources. There should be a voltage supply (Vsup) greater than 2V. An electronic circuit can be found on 8 input lines. The output current of 7.8mA makes it feature maximum design flexibility. A total of 1 elements make up this object. In addition, BROADSIDE VERSION OF 533 characterize it.
M74HC563B1R Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
M74HC56 family
20 pin count
20 pins
2/6V power supplies
1 elements
M74HC563B1R Applications
There are a lot of STMicroelectronics M74HC563B1R Latches applications.
- Parallel Input
- Serial Output Register
- Counting
- Registers
- Address register
- Storage
- Counters
- Multistage ripple counting
- Motor Drives
- Synchronous frequency dividers