M5LV-512/160-15YC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-512 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 160 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Number of Gates | 20000 |
| Max Frequency | 55.6MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 15ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5LV-512/160-15YC Overview
A mobile phone network consists of 512macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).You can find it in package [0].There are 160 I/Os programmed in it.208terminations have been programmed into the device.There is a QUADterminal position on the electrical part in question.The power supply voltage is 3.3V.This part is in the family [0].Trayis the packaging method.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.In FPGA terms, it is a type of MACH? 5series FPGA.Chips are programmed with 208 pins.This device can also display [0].The M5LV-512contains its related parts.There are 20000 gates, which are devices that acts as a building block for digital circuits. Optimal efficiency requires a supply voltage of [0].Data is stored using [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.Initially, it requires a voltage of 3Vas the minimum supply voltage.A programmable I/O count of 208 has been recorded.Ideally, the maximal frequency should be lower than 55.6MHz Hz.
M5LV-512/160-15YC Features
208-BFQFP package
160 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
M5LV-512/160-15YC Applications
There are a lot of Lattice Semiconductor Corporation M5LV-512/160-15YC CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Software-driven hardware configuration
- Reset swapping
- Configurable Addressing of I/O Boards
- Cross-Matrix Switch
- Discrete logic functions
- Voltage level translation
- POWER-SAVING MODES
- Complex programmable logic devices
- State machine design