M5-512/160-15YI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Base Part Number | M5-512 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 160 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Number of Gates | 20000 |
| Max Frequency | 83.3MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 15ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5-512/160-15YI Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a 208-BFQFP package containing it.The device is programmed with 160 I/O ports.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.Power is supplied by a voltage of 5V volts.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].It is recommended to mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the MACH? 5 series.It has 208pins programmed.If this device is used, you will also be able to find [0].The M5-512indicates that related parts can be found.In digital circuits, 20000gates serve as building blocks.In this case, EEPROMwill be used to store the data.A maximum voltage of 5.5Vis required for operation.A minimum supply voltage of 4.5V is required for it to operate.It runs on 5Vvolts of power.There should be a lower maximum frequency than 83.3MHz.
M5-512/160-15YI Features
208-BFQFP package
160 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
5V power supplies
M5-512/160-15YI Applications
There are a lot of Lattice Semiconductor Corporation M5-512/160-15YI CPLDs applications.
- Multiple DIP Switch Replacement
- Dedicated input registers
- Pattern recognition
- Power automation
- Portable digital devices
- POWER-SAVING MODES
- TIMERS/COUNTERS
- Code converters
- Handheld digital devices
- Power up sequencing