M5-192/120-15YC/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Number of Pins | 160 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-192 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Number of Gates | 7500 |
| Max Frequency | 83.3MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5-192/120-15YC/1 Overview
There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 160-BQFP package containing it.It is equipped with 120I/O ports.There are 160 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5V is used as the power supply for this device.There is a part included in Programmable Logic Devices.The chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].There should be a Surface Mounton the chip.This type of FPGA is a part of the MACH? 5 series.There are 160 pins on the chip.It is also possible to find YESwhen using this device.There are related parts in [0].As a building block for digital circuits, there are 7500gates.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.It is adopted to store data in [0].Surface Mountis used to mount this electronic component.There are 160 pins on the device.With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.The system runs on a power supply of 5V watts.It is recommended not to exceed 83.3MHzin terms of frequency.
M5-192/120-15YC/1 Features
160-BQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
160 pin count
160 pins
5V power supplies
M5-192/120-15YC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-192/120-15YC/1 CPLDs applications.
- Programmable power management
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- State machine control
- D/T registers and latches
- Cross-Matrix Switch
- I/O expansion
- Software-driven hardware configuration
- Parity generators
- STANDARD SERIAL INTERFACE UART
- Reset swapping