M5-192/120-12YC/1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-192 |
| Pin Count | 160 |
| JESD-30 Code | S-PQFP-G160 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 7500 |
| Max Frequency | 100MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5-192/120-12YC/1 Overview
This network has 192macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the 160-BQFPpackage, you will find it.It is programmed with 120 I/Os.The termination of a device is set to [0].This electrical part is wired with a terminal position of QUAD.It is powered by a voltage of 5V volts.This part is in the family [0].Ideally, the chip should be packaged by Tray.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.The chip should be mounted by Surface Mount.The FPGA belongs to the MACH? 5 series.160pins are programmed on the chip.If this device is used, you will also be able to find [0].The M5-192can be used to identify its related parts.A digital circuit can be constructed using 7500gates.For storing data, it is recommended to use [0].In this case, the maximum supply voltage is 5.25V.It operates with the minimal supply voltage of 4.75V.In order for the device to operate, it requires 5V power supplies.There should be a lower maximum frequency than 100MHz.
M5-192/120-12YC/1 Features
160-BQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
160 pin count
5V power supplies
M5-192/120-12YC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-192/120-12YC/1 CPLDs applications.
- Reset swapping
- Page register
- Software-driven hardware configuration
- Address decoding
- D/T registers and latches
- Digital designs
- POWER-SAVING MODES
- Pattern recognition
- DMA control
- Configurable Addressing of I/O Boards