M4A5-32/32-10VI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 1250 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-32/32-10VI Overview
Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].The device is programmed with 32 I/O ports.It is programmed that device terminations will be 44 .Its terminal position is QUAD.Power is supplied by a voltage of 5V volts.It is a part of family [0].It is recommended to package the chip by Tray.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.Chips are programmed with 44 pins.When using this device, YESis also available.M4A5-32contains its related parts.1250gates are devices that serve as building blocks for digital circuits.For high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.It operates with the maximal supply voltage of 5.5V.A minimum supply voltage of 4.5V is required for it to operate.Currently, it is powered by 5Vsources.A programmable I/O count of 256 has been recorded.It should be below 100MHzat the maximal frequency.
M4A5-32/32-10VI Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
5V power supplies
M4A5-32/32-10VI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-10VI CPLDs applications.
- Address decoders
- Cross-Matrix Switch
- I2C BUS INTERFACE
- STANDARD SERIAL INTERFACE UART
- Boolean function generators
- Power up sequencing
- I/O expansion
- High speed graphics processing
- Synchronous or asynchronous mode
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)