M4A3-384/192-12SAC
| Parameters | |
|---|---|
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-384 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Number of Gates | 15000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.7mm |
| Length | 27mm |
| Width | 27mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
M4A3-384/192-12SAC Overview
There are 384 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is contained in package [0].The device is programmed with 192 I/Os.It is programmed that device terminations will be 256 .This electrical part is wired with a terminal position of BOTTOM.Power is provided by a supply voltage of 3.3V volts.It is a part of family [0].It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Surface Mountshould be used for mounting the chip.In FPGA terms, it is a type of ispMACH? 4Aseries FPGA.There are 256pins on the chip.This device also displays [0].M4A3-384contains its related parts.There are 15000 gates, which are devices that acts as a building block for digital circuits. In order to achieve high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, it is mounted by Surface Mount.The device has a pinout of [0].In this case, the maximum supply voltage is 3.6V.It is powered by 3Vas its minimum supply voltage.A total of 160Programmable I/Os are present.It is recommended that the maximal frequency be lower than 83.3MHz.
M4A3-384/192-12SAC Features
256-LBGA package
192 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
256 pins
M4A3-384/192-12SAC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-384/192-12SAC CPLDs applications.
- DDC INTERFACE
- Dedicated input registers
- Software-driven hardware configuration
- Reset swapping
- INTERRUPT SYSTEM
- ToR/Aggregation/Core Switch and Router
- USB Bus
- TIMERS/COUNTERS
- Boolean function generators
- Software Configuration of Add-In Boards