M4A3-32/32-7VI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-32/32-7VI Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 44-TQFPpackage, you will find it.This device has 32 I/O ports programmed into it.Terminations of devices are set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 3.3Vprovides power to the device.It is a part of family [0].The chip should be packaged by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.It belongs to the ispMACH? 4Aseries of FPGAs.With 44pins programmed, the chip is ready to use.Additionally, this device is capable of displaying [0].According to the M4A3-32, its related parts can be found.1250gates are used to construct digital circuits.Optimal efficiency requires a supply voltage of [0].EEPROM is adopted for storing data.A maximum voltage of 3.6Vis required for operation.Despite its minimal supply voltage of [0], it is capable of operating.A total of 160programmable I/Os are available.There should be a lower maximum frequency than 125MHz.
M4A3-32/32-7VI Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
M4A3-32/32-7VI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-7VI CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Digital designs
- Handheld digital devices
- Configurable Addressing of I/O Boards
- Bootloaders for FPGAs
- Software-Driven Hardware Configuration
- I2C BUS INTERFACE
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Custom shift registers
- DMA control