M4A3-256/192-10FANC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A3-256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
M4A3-256/192-10FANC Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the 256-BGA package.In this case, there are 192 I/Os programmed.There are 256 terminations programmed into the device.The terminal position of this electrical component is BOTTOM.Power is provided by a supply voltage of 3.3V volts.It is a part of family [0].As a result, it is packaged as Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended to mount the chip by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.It has 256pins programmed.The device can also be used to find [0].The M4A3-256indicates that related parts can be found.10000gates are devices that serve as building blocks for digital circuits.High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.A voltage of 3.6V is the maximum supply voltage for this device.Normally, it operates with a voltage of 3VV as its minimum supply voltage.A total of 160programmable I/Os are available.100MHzis the maximum frequency.
M4A3-256/192-10FANC Features
256-BGA package
192 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
M4A3-256/192-10FANC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/192-10FANC CPLDs applications.
- I2C BUS INTERFACE
- PLC analog input modules
- Boolean function generators
- Software-driven hardware configuration
- POWER-SAVING MODES
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Parity generators
- High speed graphics processing
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Interface bridging