M4A3-256/128-7SAI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 67 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.7mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-256/128-7SAI Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.A 256-LBGA package contains the item.The device is programmed with 128 I/O ports.There is a 256terminations set on devices.There is a BOTTOMterminal position on the electrical part in question.The power supply voltage is 3.3V.It is a part of family [0].Ideally, the chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.With 256pins programmed, the chip is ready to use.This device can also display [0].The M4A3-256indicates that its related parts can be found.The 10000gates serve as building blocks for digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].For data storage, EEPROMis adopted.A voltage of 3.6V is the maximum supply voltage for this device.A minimum supply voltage of 3V is required for it to operate.A programmable I/O count of 67 has been recorded.125MHzis the maximum frequency.Input signals are detected by 14dedicated inputs.
M4A3-256/128-7SAI Features
256-LBGA package
128 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
M4A3-256/128-7SAI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-7SAI CPLDs applications.
- Storage Cards and Storage Racks
- Pattern recognition
- Digital designs
- Power up sequencing
- Auxiliary Power Supply Isolated and Non-isolated
- Reset swapping
- Software-Driven Hardware Configuration
- Protection relays
- PLC analog input modules
- Parity generators