M4A3-256/128-12YI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | M4A3-256 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 10000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-256/128-12YI Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.A 208-BFQFP package contains the item.As a result, it has 128 I/O ports programmed.The termination of a device is set to [0].The terminal position of this electrical component is QUAD.A voltage of 3.3V is used as the power supply for this device.It is a part of the family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.It is recommended to mount the chip by Surface Mount.The ispMACH? 4Aseries comprises this type of FPGA.208pins are programmed on the chip.Additionally, this device is capable of displaying [0].There are related parts in [0].In digital circuits, there are 10000gates, which act as a basic building block.The supply voltage should be maintained at 3.3V for high efficiency.EEPROM is adopted for storing data.There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.A total of 97 Programmable I/Os are available.It is recommended that the maximal frequency be lower than 83.3MHz.The status of input signals is determined by 14dedicated inputs.
M4A3-256/128-12YI Features
208-BFQFP package
128 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
M4A3-256/128-12YI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-12YI CPLDs applications.
- Interface bridging
- Address decoders
- State machine design
- Timing control
- Cross-Matrix Switch
- State machine control
- Field programmable gate
- Random logic replacement
- Programmable power management
- USB Bus