M4A3-128/64-7YI
| Parameters | |
|---|---|
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | M4A3-128 |
| Pin Count | 100 |
| JESD-30 Code | R-PQFP-G100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
M4A3-128/64-7YI Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the 100-BQFP package.There are 64 I/Os on the board.100terminations are programmed into the device.There is a QUADterminal position on the electrical part in question.It is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.The ispMACH? 4Aseries FPGA is one of these types.100pins are programmed on the chip.When using this device, YEScan also be found.M4A3-128contains its related parts.In digital circuits, 5000gates serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].In this case, EEPROMwill be used to store the data.There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.Currently, there are 224 Programmable I/Os available.There should be a lower maximum frequency than 125MHz.Input signals are detected using 2dedicated inputs.
M4A3-128/64-7YI Features
100-BQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
M4A3-128/64-7YI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-128/64-7YI CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- High speed graphics processing
- Software-Driven Hardware Configuration
- I/O expansion
- Power automation
- POWER-SAVING MODES
- Programmable polarity
- Page register
- Code converters
- Dedicated input registers