M4A3-128/64-7CAC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LFBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-128 |
| Pin Count | 100 |
| JESD-30 Code | S-PBGA-B100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 400 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.5mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-128/64-7CAC Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a 100-LFBGA package.As a result, it has 64 I/O ports programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a BOTTOMterminal position on the electrical part in question.A voltage of 3.3V is used as the power supply for this device.This part is in the family [0].It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Chips should be mounted by Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.Chips are programmed with 100 pins.When using this device, YESis also available.The M4A3-128can be used to identify its related parts.In digital circuits, there are 5000gates, which act as a basic building block.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Initially, it requires a voltage of 3Vas the minimum supply voltage.A total of 400programmable I/Os are available.It is recommended that the maximal frequency be lower than 125MHz.A total of 2dedicated inputs are available for detecting the status of input signals.
M4A3-128/64-7CAC Features
100-LFBGA package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
M4A3-128/64-7CAC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-128/64-7CAC CPLDs applications.
- DDC INTERFACE
- Voltage level translation
- Power up sequencing
- Address decoding
- Bootloaders for FPGAs
- STANDARD SERIAL INTERFACE UART
- Reset swapping
- ON-CHIP OSCILLATOR CIRCUIT
- Battery operated portable devices
- Discrete logic functions