M4-128N/64-14JI
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 84-LCC (J-Lead) |
| Number of Pins | 84 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | MACH® 4 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 84 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | NO |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4-128N |
| Pin Count | 84 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 14 ns |
| Number of Gates | 5000 |
| Max Frequency | 182MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.57mm |
| Length | 29.3116mm |
| Width | 29.3116mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
M4-128N/64-14JI Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 84-LCC (J-Lead) package.There are 64 I/Os programmed in it.There is a 84terminations set on devices.The terminal position of this electrical component is QUAD.The power source is powered by 5Vvolts.It is a part of the family [0].Ideally, the chip should be packaged by Tube.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.It is a type of FPGA belonging to the MACH? 4 series.There are 84 pins on the chip.It is also possible to find NOwhen using this device.According to the M4-128N, its related parts can be found.A digital circuit is built using 5000gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].This device is mounted by Surface Mount.There are 84pins on it.There is a maximum supply voltage of 5.5Vwhen the device is operating.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.The system runs on a power supply of 5V watts.It is recommended that the maximal frequency be lower than 182MHz.To detect the status of input signals, there are 2dedicated inputs.
M4-128N/64-14JI Features
84-LCC (J-Lead) package
64 I/Os
The operating temperature of -40°C~85°C TA
84 pin count
84 pins
5V power supplies
M4-128N/64-14JI Applications
There are a lot of Lattice Semiconductor Corporation M4-128N/64-14JI CPLDs applications.
- Synchronous or asynchronous mode
- I2C BUS INTERFACE
- Code converters
- Digital designs
- DMA control
- I/O PORTS (MCU MODULE)
- Portable digital devices
- PLC analog input modules
- Timing control
- Auxiliary Power Supply Isolated and Non-isolated