LV8548MC-AH
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 19 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-SOP (0.154, 3.90mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Terminal Finish | Tin (Sn) |
| Applications | DC Motors, General Purpose, Stepper Motors |
| Additional Feature | SEATED HT-CALCULATED |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 1W |
| Technology | DMOS |
| Voltage - Supply | 4V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1mm |
| Base Part Number | LV8548M |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | Logic |
| Nominal Supply Current | 1.7mA |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 1W |
| Output Current | 1A |
| Halogen Free | Halogen Free |
| Collector Emitter Voltage (VCEO) | 16V |
| Max Collector Current | 1A |
| Voltage - Load | 4V~16V |
| Rds On (Typ) | 1 Ω |
| Motor Type | Stepper |
| Load Type | Inductive |
| Height | 2mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LV8548MC-AH Overview
For packaging, Cut Tape (CT) is used.A cost-saving measure is taken to include H bridge in the 10-SOP (0.154, 3.90mm Width) package.The supply voltage 4V~16V has the capabilbridge drivery of improving reliabilbridge drivery.H bridge circuit is mounted in the way of Surface Mount.-30°C~85°C TA is able to function normally at motor driver H bridges operating temperature.Among H bridge motor drivers many uses, H bridge motor driver can be found in DC Motors, General Purpose, Stepper Motors as well.In order to mount H gate on the PCB, Surface Mount is used.A transmission line can be terminated at a 10 termination with the H bridge whose characteristic impedance matches the transmission line.It is used as a pronged contact as H bridge ic of a signal interface when 10 pins are used.In addition to the LV8548M H bridge ic number, more related H bridge ics can be located by using its base H bridge ic number.A voltage of 12V is used as the supply voltage.During a specified ambient temperature, the power supply can supply the maximum load current 1A.Through the pins of the power supply and output, there is a current of 1A.It is through the 10 pins that the bridge driver can perform its specific functions.The output of this Hbridge is 2.Under the subcategory of Motion Control Electronics, this H bridge motor driver shares various similarities with other parts.In addition, H-bridge is capable of providing SEATED HT-CALCULATED.
LV8548MC-AH Features
Available in 10-SOP (0.154, 3.90mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LV8548M
With SEATED HT-CALCULATED Drivers
LV8548MC-AH Applications
There are a lot of ON Semiconductor LV8548MC-AH Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Fans
- Telecom Microprocessor
- V-Core
- Voltage Regulators for DDR memory arrays
- Dual DC motor
- Industrial Automation
- Notebook Computers
- DC-DC Converters
- Compact Blade Servers
- Voltage Regulators for GPUs