LTC690IS8#PBF
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC690I |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 500mW |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
LTC690IS8#PBF Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tube-packaging is used. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. There is a subcategory called Power Management Circuits for this power management. There are a total of 8 pins on power management. There are 8 pins on the supervisor. Supply voltage (Vsup) should be at least 4.75V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. You can always use LTC690I, the base supervisor number, to search for similar PMICs of the manufacturer. There is a requirement for 5V power to power this power management. A maximum supply temperature of 1.5mA can be used with this power management.
LTC690IS8#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.75V
LTC690IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC690IS8#PBF Voltage Supervisors applications.
- Analog circuit
- Efficient information transmission
- Household appliances
- Sensitive sensors
- Power communication system
- Utility meter
- Dash board
- Power distribution systems of infant care room
- Transformer load monitoring equipment
- Cloud computing