LTC6400IUD-14#PBF
| Parameters | |
|---|---|
| Nominal Gain Bandwidth Product | 1.86 GHz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | ADC Driver |
| Resistance | 230Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Data Acquisition |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6400 |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.5V |
| Min Supply Voltage | 2.85V |
| Slew Rate | 4800 V/μs |
| Common Mode Rejection Ratio | 40 dB |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 2.37 GHz |
| Voltage Gain | 14.5dB |
| Power Supply Rejection Ratio (PSRR) | 55dB |
LTC6400IUD-14#PBF Overview
Housed in a Tube package.There is no doubt that this ADC Driver is a very good value for the price.It's in the 16-WFQFN Exposed Pad package.A mounting process is involved, which involves mounting the part in the Surface Mount direction.Mostly, it is used in Data Acquisition.Here's the LTC6400 part number.It is used here to access high performance for amplification purposes by using the 1 functions.It is estimated that there are 16 terminals in total, each of which has its own function.Peak relow should be carried out under 260 while the iron temperature is being controlled.As a whole, there are a total of six 16 pins on the part.It is recommended to use a supply voltage of 3V in order to fully run this amplifier.You can use this 16-pin amplifier to customize it to meet your needs.Having a very low temperature of as low as -40°C is the lowest that a device can operate at.This part has the capability of operating at temperatures of up to 85°C, which is quite impressive.This Operational Amplifier is just like any other high-quality Operational Amplifier in terms of power and amplification, as it has magnificent amplification abilities.Depending on the supply voltage, the device is rated for a maximum voltage of 3.5V.Powered by at least 2.85V watts when supplied.In order to achieve amazing performance, this device combines a large number of 1 channels.Using 3V, this device can be supplied.The voltage gain of this amplifier is excellent.It is specified that this amplifier has a 230Ohm resistance.
LTC6400IUD-14#PBF Features
LTC6400IUD-14#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6400IUD-14#PBF Special Purpose Amplifiers applications.
- Video and image computer boards
- Integrator and differentiator circuits
- Automotive sensors
- Television broadcasting equipment
- Navigation
- Band-pass filter
- single/dual op amp sum and difference circuits
- pH (acidity)
- High/low-pass filter circuit
- earphone